Special M42-Co8-W

All purpose blade for material dimensions from 20 to 80 mm maximal contact length. Variable tooth pitch - rake angle 0°.

Engineered for

• profiles and solid materials
• all steels up to 45° HRc
• demanding workshop operations

Superior, because
Cost reduced by using 3% Cr-Backer and optimized producing program.
For general purpose up to 45° Rockwell materials.

Special M42-Co8-WP

All purpose blade for material dimensions from 50 to 350 mm maximal contact length. Variable tooth pitch - rake angle 10° positive.

Engineered for

• profiles and solid materials
• all steels up to 45° HRc
• demanding workshop operations

Superior, because
Cost reduced by using 3% Cr-Backer and optimized producing program.

HSS Bi-M42 ALUCUT

Easy cuts in light metals. Hook (P); 10° positive rake angle, extra wide set

Engineered for

• pure aluminium and aluminium alloys
• all dimensions

Superior, because
Tooth tips made of HSS M42 / material no. 1.3247. The positive hook tooth with an extra heavy set performs at all dimensions. Smooth cuts and tool life that convinces.

HSS Bi-M42-PROFIL

Outstanding performance for Heavy Fabricators. Variable tooth; 6° rake angle, extra wide set

Engineered for

• beams
• layer and bundle cuts
• hollow profiles
• angle profiles

Superior, because
Tooth tips made of HSS M42 / materials no. 1.3247. The variable tooth with slightly positive rake angle and extra heavy group-set shows excellent performance on H-beams and similar shapes.
The Bi-HSS-M42-PROFIL avoids blade pinching in beams with inside tension, or in poorly supported profiles. For 90° and miter cutting.

HSS Bi-M42 Co8-S

All purpose blade for small dimension solid steel. Standard teeth (S); 0° rake angle

Engineered for

• common steel qualities up to 1400 N/mm² tensile strength
• non ferrous metals
• cross sections up to approx. 100 mm (4 inch)
• contour cutting operations

Superior, because
Tooth tips of HSS M42 / material no. 1.3247. The standard tooth with 0° resp. slightly positive rake angle combined with a standard-raker or wavy set is distinguished to cut short chipping materials and light wall thicknesses. For smooth and burr-free cuts.